Operation; Channel Selection; Sound Settings; Screen Settings - Medion LIFE P18047 Instruction Manual

5. Operation

5.1. Channel selection

To select a channel, either press one of the P +/- buttons on the remote control, P/CH +/- on the device or select the
channel directly using the number buttons.
For a two- or three-digit number, press the number buttons in the appropriate order.
 Use the
(UYCR) button to select the last channel played.
 By pressing the QM button on the remote control you can call up the channel list, select the channel with the  and
 buttons and confirm with QM.

5.2. Sound settings

 You can increase or decrease the volume by pressing the volume buttons
device.
 Use the
button to switch the volume fully off and on again.
 Pressing the LANG button will display the current audio language.

5.3. Screen settings

 Use the RTGUGV to choose between the screen modes: NATURAL, CINEMA, GAME, SPORTS, DYNAM-
IC.
 Depending on the programme, the pictures are displayed in the formats 4:3 or 16:9. Use the UK\G button to adjust
the picture format.
AUTO: The format displayed is automatically adjusted to match the input signal.
FULL SCREEN: (only in HDMI mode and for HDTV programmes
received via cable or satellite): Pixel-exact reproduction of the image
(1:1).
16:9: Here you can stretch out the left and right sides of a normal
image (aspect ratio 4:3) by an equal amount to fill the entire width of
the screen.
SUBTITLE: With this function, a widescreen image (aspect ratio
16:9) with subtitles is zoomed to full screen size.
14:9: With this function, a wide image (aspect ratio 14:9) is zoomed
to the upper and lower edges of the screen.
14:9 ZOOM: This option sets the 14:9 picture format.
4:3: Is used to view a standard image (aspect ratio 4:3) as this is its
original format.
CINEMA: With this function, a widescreen image (aspect ratio 16:9)
is zoomed to full screen size.
16
on the remote control or on the
SUBTITLE SUBTITLE