Before First Use; Preparing Ingredients; Speed Settings - Silvercrest 282237 Operating Instructions Manual

CAUTION! PROPERTY DAMAGE!
Never fill the appliance with hard ingredients such as nuts, stalks,
►
large grains or seeds!
Never fill the appliance with hot ingredients!
►
Never crush ice cubes without any liquid in the blender jug!
►
Before first use
1) Remove all of the parts from the box and remove
the packaging material and any protective film.
2) Clean all components as described in the
section "Cleaning and Care". Ensure that all
parts are completely dry.

Preparing ingredients

■ Remove all peel, such as orange peel or kiwi
skin, from the fruit.
■ Remove large pips and stones, e.g. peach
stones, from the fruits.
■ Cut the fruit into small pieces (approx. 1 - 2 cm).
■ Chop herbs or salads into small pieces.
NOTE
► You can also crush ice cubes with this appli-
ance (max 50 g/approx. 2–4 ice cubes).
Only add the whole ice cubes to the blender
jug / if they are being processed
together with liquids. Always use the pulse
function when you process whole ice cubes.
Generally, however, we recommend that you
use already crushed ice in this device.
SSME 250 A2

Speed settings

„0"
Appliance is switched off.
„I"
For chopping and blending soft and liquid ingredi-
ents such as strawberries or yoghurt.
„II"
For chopping and blending harder and liquid
ingredients such as beetroot or pumpkin.
„P"
For short, powerful pulse operation (Pulse function),
e.g. for crushing ice cubes or for cleaning. To avoid
overburdening the motor, the speed switch
not lock into this position. Only hold the speed
switch in this position for short periods.
does
│ 5 ■
GB