Cleaning And Care; Storage - Silvercrest 282237 Operating Instructions Manual

Cleaning and care

DANGER –
RISK OF ELECTRICAL SHOCK!
► Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
NEVER immerse the base
other fluids!
■ It is best to clean the appliance directly after
use. This makes food residues easier to remove.
CAUTION! MATERIAL DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These can damage the surface of
the appliance!
■ Wipe the base with a damp cloth. For stub-
born soiling use a mild detergent on the cloth.
Wipe off any detergent residue using a cloth
moistened with clean water.
■ Clean the blender jug
with blade , and the lid
with a little mild detergent. Afterwards, rinse
all parts with clean water so that no detergent
residues remain.
SSME 250 A2
in water or
/ , the blade holder
/ in warm water
NOTE
If you clean the appliance directly after use, you
can usually achieve sufficiently hygienic cleaning
results for the blender jug
holder by using the following alternatives:
► Large blender jug
jug with about 500 ml of water and add
a few drops of mild detergent.
Small blender jug
jug with about 200 ml of water and add
a few drops of mild detergent.
► Attach the blade holder
onto the base .
► Activate the "Pulse" function a few times so
that the blade
► Afterwards, rinse the blender jug
the blade holder
water to remove all detergent residues.
■ After cleaning, dry all parts thoroughly.
NOTE
► You can also clean the lid
jug / and the blade holder
dishwasher. If possible, place the parts in the
upper basket and ensure that none of the
parts can get stuck. Otherwise they might
deform.

Storage

■ Store the cleaned appliance in a clean, dust-free
and dry place.
■ You can coil up the cable and fasten it using the
supplied cable clip
/ and the blade
: Fill the large blender
: Fill the small blender
and screw both
churns through the water.
/
with plenty of clear
/ , the blender
in your
.
│
GB
and
7 ■