Operation - Dimplex DF2524G Owner's Manual

Operation

Figure 5
On Screen Display
The unit can be controlled by
either the manual controls which
are located on the upper right of
the fireplace or the remote (Figure
5 & 6).
The fireplace is supplied with an
IR multifunction remote control.
! NOTE: To operate correctly,
the remote control must be point-
ed towards the front of the unit.
A. Standby
Turns the unit On and Off.
→ Activated by pressing the
Standby button on the remote or
the unit.
• The unit will turn on with the
same functions that it was set
to when it was turned Off and
the intake temperature will be
indicated on the On Screen
8
A
B C F
C
Figure 6
A
D
F
B
Display.
! NOTE: When any button is
pressed the intake tempera-
ture will be displayed on the On
Screen Display for 5 seconds.
B. Flame Effects
Units with Logsets
Cycles through the different
Lighting Effects: Flames and
Log, Flame only, Log Only,
Flames and Log Off.
→ Activated by pressing the
button on the remote or the unit.
Units with Glass Media
The Flames can be turned off
by pressing the
again to turn back on.
→ Activated by pressing the
button on the remote or the unit.
E
F
C
button, then
www.dimplex.com