Selecting A Type (Multi-Fx Type) - Roland GR-33 Owner's Manual

Chapter 6 Using the Built-in Effects

Selecting a Type (MULTI-FX TYPE)

Multi Effects provides 40 different effects types (MULTI-FX
TYPE). For each of these effect types, you can specify
parameter values. By changing these parameters, various
effects can be applied.
Parameters for each effects type are given on the following
pages.
1: STEREO-EQ
2: OVERDRIVE
3: DISTORTION
4: PHASER
5: SPECTRUM
6: ENHANCER
7: AUTO-WAH
8: ROTARY
9: COMPRESSOR
10: LIMITER
11: HEXA-CHO
12: TREMOLO-CHORUS
13: SPACE-D
14: STEREO-CHO
15: STEREO-FL
16: STEP-FL
17: STEREO-DELAY
18: MOD-DELAY
19: 3-TAP-DELAY
20: 4-TAP-DELAY
21: TIMECTRL-DLY
22: 2VOICE-P. SFT
23: FB-P. SFT
24: REVERB
25: GATE-REVERB
26: OD CHO
27: OD FL
28: OD DLY
29: DS CHO
30: DS FL
31: DS DLY
32: EH CHO
33: EH FL
34: EH DLY
35: CHO DLY
36: FL DLY
37: CHO FL
38: CHO/DLY
39: FL/DLY
40: CHO/FL
54
1. Select the patch for which Multi-effect is to be set, and
2. Use [PARAMETER] to select "MULTI-FX TYPE."
fig.6-04
( p. 55)
( p. 55)
( p. 56)
3. Use [VALUE] to select the effect type.
( p. 56)
4. Press [PARAMETER] to select the setting item for the
( p. 56)
( p. 57)
( p. 57)
( p. 57)
( p. 58)
5. Use [VALUE] to select the value.
( p. 58)
6. Repeat steps 4 to 5 to set all parameters of the selected
( p. 59)
( p. 59)
( p. 60) 7. Press [WRITE] to perform the Patch Write operation (p.
( p. 60)
( p. 61)
( p. 61)
( p. 62)
( p. 63)
( p. 63)
( p. 64)
( p. 65)
( p. 65)
( p. 66)
( p. 67)
( p. 67)
( p. 68)
( p. 68)
( p. 69)
( p. 69)
( p. 69)
( p. 69)
( p. 70)
( p. 70)
( p. 71)
( p. 71)
( p. 72)
( p. 72)
( p. 73)
( p. 73)
( p. 73)
Making Multi-effects Settings
press [EFFECTS] to go into Patch Edit mode.
effect type selected in step 3.
For a description of the effect type parameters, see the
subsequent section, "About Multi-Effects Parameters."
effect type.
36).
* After performing the Patch Write operation, you will
automatically return to Play mode.
* If you don't want to save the Patch, press [PLAY] to return to
Play mode.
The value of effect type items (parameters) marked with
a "#" symbol can be controlled by the EXP pedal. For
details on EXP pedal settings, refer to "Using the
expression pedal" (p. 47).