Advertisement
FCC Compliance Statement
IMPORTANT!
This Section relates only to SR150F (PN: MSA1356A) SR250F (PN:
MSA1452A), SR500F (PN: MS700A) and SR1000F (PN: MSA1231A)
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in residential installations. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio and television
reception.
However, there is no guarantee that interference will not occur in a particular installation. If
this device does cause such interference, which can be verified by turning the device off and
on, the user is encouraged to eliminate the interference by one or more of the following
measures:
Re-orient or relocate the receiving antenna.
•
Increase the distance between the device and the receiver.
•
Connect the device to an outlet on a circuit different from the one that supplies
•
power to the receiver.
Consult the dealer or an experienced radio/TV technician.
•
Warning!
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
To comply with FCC Section 1.1310 for human exposure to radiofrequency electromagnetic
fields, implement the following instruction:
A distance of at least 30cm. between the equipment and all persons should be maintained
during the operation of the equipment.
Industry Canada Compliance
Important
: This Section relates only to SR150F (PN: MSA1356A) SR250F (PN:
MSA1452A), SR500F (PN: MS700A) and SR1000F (PN: MSA1231A).
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference that may be received or that may cause undesired
operation. A distance of at least 30cm. between the equipment and all persons should be
maintained during the operation of the equipment.
©2023, Magos Systems Ltd. All rights reserved.
Advertisement
