Advertisement
System Power / Trigger Wire Connection
System requires 3 wire connection
RED = ACC / IGN
YELLOW = 12 - 32VDC
BLACK = GROUND
IMPORTANT
: Check vehicle manufacture user manual to ensure proper connection of power, fuse and turn signal wire.
CUT, Strip and splice OEM factory wires as it may damage or interfere with vehicle operation. Use Posi- Tap / T-Tap connectors
when connecting Ventra systems to vehicle wire.
other undesired malfunctions.
Turn Signal Trigger – OPTIONAL CONNECTION
When finding turn signal, find the TRUE Turn Signal. Use voltage meter to measure the wire of turn signal. Example: Tap the brake and
see if there's voltage. If there's voltage on the wire, then it's a multipurpose wire – do not connect Ventra turn signal trigger wire to
that wire
For any triggered action, such as turn signal or reverse gear, the monitor will continue to display full screen mode of that camera for 7
seconds (user configurable) after trigger is disengaged.
IMPORTANT: Yellow wire (12V) must be connected to a constant power source
for system to retain clock and calendar setting. This will not drain vehicle battery
Driver side
Passenger
Grey
Brown
Green
As many wires are multi function wires and when tapping into those, could lead to
Connect to RIGHT /
R
Passenger side Turn
signal
Connect to LEFT
L
/ Driver side Turn
signal
Connect to
REVERSE gear signal
Never
Advertisement
