Biketec AG 500085 Instruction Manual page 48

Fit display compact + fit remote basic / eshift
Table of Contents

Advertisement

INSTRUCTION MANUAL
Error code
Displayed error message
69-04, 69-0D
Battery Temperature Error
69-05, 69-0A,
Battery temperature error
69-0F, 69-11,
69-12
69-06, 69-0B,
Battery Temperature Error
69-10
69-13
Battery Temperature Error
6A-xx
Battery Software Error
6B-xx
Battery Hardware Error
6C-xx
Battery Communication Error
6D-xx
Battery Authentication Error
6E-xx
Unknown Battery Error
FIT_Manual_Display_Compact_Remote_Basic_EShift_V2_en | Version 02 | 02.05.2023
FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT
Action/limitation
1. System is operated below the permitted
temperature.
2. Allow battery to warm up in a warm
environment (> 30 minutes).
3. Start system.
4. Contact your specialist dealer if the problem
persists.
1. Switch off e-bike.
2. Leave battery to cool down (> 60 minutes).
3. Start system.
4. Contact your specialist dealer if the problem
persists.
1. System is operated below the permitted
temperature.
2. Allow battery to warm up in a warm
environment (> 30 minutes).
3. Start system.
4. Contact your specialist dealer if the problem
persists.
1. Start system.
2. Contact your specialist dealer if the problem
persists.
1. Check that the correct battery has been inserted
(36V / 48V).
2. Check plug contacts on the battery and bicycle
and clean if necessary.
3. Carry out system restart.
4. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Check whether the correct battery has been
inserted (36V / 48V).
2. Check 2 plug contacts on the battery and bicycle
and clean if necessary.
3. Carry out system restart.
4. Contact your specialist dealer if the problem
persists.
1. Check that the correct battery has been inserted
(36V / 48V).
2. Check plug contacts on the battery and bicycle
and clean if necessary.
3. Perform system restart.
4. Contact your specialist dealer if the problem
persists.
1. Check that the correct battery has been inserted
(36V / 48V).
2. Check plug contacts on the battery and bicycle
and clean if necessary.
3. Perform system restart.
4. Contact your specialist dealer if the problem
persists.
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

500092501262500429

Table of Contents