Biketec AG 500085 Instruction Manual page 42

INSTRUCTION MANUAL
Error code Displayed error message
16-02 Display Theft Detection
16-03, 16-04, Battery Theft Detection
16-05, 16-06
16-07 Speednode Theft Detection
16-08 Gear Shift Theft Detection
16-0A Charger Theft Detection
16-0B Lock Theft Detection
17-00 Remote Defective Components
17-01 Motor Defective Components
17-02 Display Defective Components
17-03, 17-04, Battery Defective Components
17-05, 17-06
FIT_Manual_Display_Compact_Remote_Basic_EShift_V2_en | Version 02 | 02.05.2023
FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT
Action/limitation
1. Re-start the system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert display and start system.
5. Contact your specialist dealer if the problem
persists.
1. Restart system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert battery and start system.
5. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Switch off system.
3. Disconnect charger from system and socket.
4. Wait until the status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Plug charger into the socket again.
7. Plug charger into the system again and start
system up.
8. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert display and start system.
5. Contact your specialist dealer if the problem
persists.
1. Restart system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert battery and start system.
5. Contact your specialist dealer if the problem
persists.
42