Biketec AG 500085 Instruction Manual page 40

INSTRUCTION MANUAL
Error code Displayed error message
0F-0A Charger Update Error
0F-0B Lock Update Error
10-xx Remote Software Error
11-xx Remote-Battery Communication
Error
12-01 Remote-Motor Pairing Error
12-02 Remote-Display Pairing Error
12-03, 12-04, Remote-Battery Pairing Error
12-05, 12-06
12-07 Remote-Speednode Pairing Error
12-08 Remote-Gear Shift Pairing Error
12-0A Remote-Charger Pairing Error
FIT_Manual_Display_Compact_Remote_Basic_EShift_V2_en | Version 02 | 02.05.2023
FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT
Action/limitation
1. Re-start the system.
2. Switch off system.
3. Disconnect charger from system and socket.
4. Wait until the status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Plug charger into the socket again.
7. Plug charger into the system again and start
system up.
8. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert display and start system.
5. Contact your specialist dealer if the problem
persists.
1. Restart system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert battery and start system.
5. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Switch off system.
3. Disconnect charger from system and socket.
4. Wait until the status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Plug charger into the socket again.
7. Plug charger into the system again and start
system up.
8. Contact your specialist dealer if the problem
persists.
40