Biketec AG 500085 Instruction Manual page 38

INSTRUCTION MANUAL
Error code Displayed error message
0C-02 Remote-Display Identification
Error
0C-03, 0C-04, Remote-Battery Identification
0C-05, 0C-06 Error
0C-07 Remote-Speednode Identification
Error
0C-08 Remote-Gear Shift Identification
Error
0C-0A Remote-Charger Identification
Error
0C-0B Remote-Lock Identification Error
0D-01 Motor Authentication Error
0D-02 Display authentication error
0D-03, 0D-04, Battery Authentication Error
0D-05, 0D-06
0D-07 Speednode Authentication Error
FIT_Manual_Display_Compact_Remote_Basic_EShift_V2_en | Version 02 | 02.05.2023
FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT
Action/limitation
1. Re-start the system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert display and start system.
5. Contact your specialist dealer if the problem
persists.
1. Restart system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert battery and start system.
5. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Switch off system.
3. Disconnect charger from system and socket.
4. Wait until the status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Plug charger into the socket again.
7. Plug charger into the system again and start
system up.
8. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert display and start system.
5. Contact your specialist dealer if the problem
persists.
1. Restart system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert battery and start system.
5. Contact your specialist dealer if the problem
persists.
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
38