Table of Contents
Advertisement
INSTRUCTION MANUAL
Date
You can set the current date in the date menu. The current digit can be changed by pressing the plus / minus button.
Select the number to be changed with the selection rocker switch. Press the selection rocker switch to save the date
and quit the menu. Press "Cancel" to leave the menu without saving the changes.
Units
You can switch between the metric and imperial system in the units menu. The following units are replaced:
Measured value
Distance
Speed
Energy consumption
Temperature
Elevation
Menu – Connectivity
Information on the availability and use of add-on devices that can be connected can be found on the e-bike manu-
facturer's website.
Menu – My Bike
The user-related settings for the e-bike can be carried out in this menu.
Assistance
You can adjust the assistance level of the e-bike individually. Use the selection rocker switch in the assistance menu
to set the desired assistance level. The preset assistance always affects the three levels («ECO», «STD», «AUTO»)
equally. In the "HIGH" stage, the motor always provides full assistance regardless of the individual assistance setting.
If all the bars on the display are black, the maximum possible amount of assistance is set in the assistance levels
«ECO», «STD» and «AUTO». This setting results in a shorter range. If only the bar at the far left of the display is black,
the minimum amount of assistance is set in the assistance levels «ECO», «STD» and «AUTO». This setting enables
the maximum possible range to be achieved in the «ECO» assistance level. The setting can be secured by pressing
the selection rocker switch. If Expert mode is activated via the FIT E-Bike Control app, the e-bike's assistance is set
via the app and cannot be changed on the e-bike.
Altitude calibration
The altimeter is calibrated in the calibration menu.
Important: The altitude measurement depends on the atmospheric pressure and can lead to deviations if this
changes. We recommend that you carry out a calibration if the weather changes.
Auto. backlighting
You can choose between the automatic adjustment of the display's backlighting to the ambient light (ON) or a manual
setting of the backlighting (OFF) between 10 and 100% in this menu. Pressing the selection rocker saves the selected
backlight and exits the menu. Clicking Cancel exits the menu without saving any changes.
INFO-CIR
NOTICE
If the Display gets too hot, the backlighting is automatically reduced to 20%.
This is a precautionary measure to prevent temporary discoloration on the display. When the tem-
perature has fallen back to normal, the brightness automatically switches back to the previously
set value.
FIT_Manual_Display_Compact_Remote_Basic_EShift_V2_en | Version 02 | 02.05.2023
Metric
Imperial
km
mi
km/h
mph
Wh/km
Wh/mi
°C
°F
m.a.s.l.
FAMSL
FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT
31
Advertisement
Table of Contents
