Honda NSS250A Owner's Manual page 61

#
Changing the Answer Back Buzzer
Sound Pattern
You can select 3 buzzer sound patterns.
Make sure that the Honda SMART Key
a
system is active.
(P.42)
Remove the battery lid.
b
Push the ignition switch to authenticate the
c
Honda SMART Key system.
Connect the EM mode coupler provided in
d
the tool kit to the EM mode connector.
(P.119)
The Honda SMART Key indicator and
u
ignition switch ring go off.
Answer back
button
Ignition switch ring
(P.93)
(P.46)
Ignition switch
Push the ignition switch 1 time.
e
Repeat the following 3 times:
f
Press the answer back button on the
Honda SMART Key 3 times and the
ignition switch 1 time.
When the answer back button is pressed,
u
the Honda SMART Key LED comes on.
Make sure the LED goes off before
pressing the button again.
If the answer back button or ignition
u
switch is not pressed for 1 minute, the
Honda SMART Key indicator starts
blinking and this mode will be cancelled.
If so, remove the EM mode coupler,
return to and follow the procedure
c
again.
Continued
57