Honda NSS250A Owner's Manual page 56

Anti-theft Alarm System
#
Adjusting the Sensitivity of Anti-theft
Alarm System
You can select from 3 sensitivity levels for the
anti-theft alarm system.
Make sure that the Honda SMART Key
a
system is active.
Remove the battery lid.
b
Push the ignition switch to authenticate the
c
Honda SMART Key system.
Connect the EM mode coupler provided in
d
the tool kit to the EM mode connector.
(P.119)
The Honda SMART Key indicator and
u
ignition switch ring go off.
Alarm button
52
(Continued)
(P.42)
(P.93)
(P.46)
Ignition switch
Ignition switch ring
Push the ignition switch 1 time.
e
Repeat the following 3 times:
f
Press the alarm button on the Honda
SMART Key 2 times and the ignition
switch 1 time.
When the alarm button is pressed, the
u
Honda SMART Key LED comes on. Make
sure the LED goes off before pressing
the button again.
If the alarm button or ignition switch is
u
not pressed for 1 minute, the Honda
SMART Key indicator starts blinking and
this mode will be cancelled. If so, remove
the EM mode coupler, return to
follow the procedure again.
and
c