Program Schedule Holds; Temporary Hold; Away; Vacation - Aprilaire S86W MUPR Owner's Manual

HEAT BLAST® (IF INSTALLED)
Heat Blast® will raise the current room temperature 3°F to 5°F based on the installer set-up, and
then resume normal operation
To activate Heat Blast, select Heat Blast from the Menu, and use the Select button to set the
toggle to ON
NOTE: Heat Blast button is only available if it is enabled in the Installer Setup and the thermostat
is in Heat or Emergency Heat mode
To cancel Heat Blast, select Heat Blast from the Menu, and use the Select button to set the
toggle to OFF
26

PROGRAM SCHEDULE HOLDS

TEMPORARY HOLD

Press or to immediately adjust the temperature when the
schedule is running This will temporarily hold the temperature
setting until the next scheduled event
A temporary hold can also be set from the Hold option in the
Menu The end time of the hold can also be adjusted from here
The temporary hold can be canceled from the Hold option in
the Menu, or by adjusting the temperature back to the scheduled temperature.

AWAY

The Away feature allows the thermostat to be set to a predefined setpoint(s) by simply pressing
the Away button in your App or in the thermostat's Menu The default cooling setpoint is 85°F
(29.5°C), the default heating setpoint is 62°F (16.5°C) and the default fan mode is Auto The
default settings can be modified in the Settings Menu under the Away option Away can be
canceled from the Away option in the Menu

VACATION

This energy saving feature allows you to suspend the programmed schedule for an extended
period of time. The selected temperature and dehumidification setpoint (optional) will be
maintained until the vacation hold end date and time. Once that date and time are met, the
previously programmed schedule will resume. If you return earlier than expected, turn off the
vacation hold from the Vacation option in the Menu to resume the programmed schedule
HEATING
70
72
HOLD 5:00
PM
27