Heat Blast; Program Schedule Holds; Temporary; Permanent - Aprilaire Home Comfort Control 8830 Owner's Manual

PROGRAM SCHEDULE AND HOLDS

HEAT BLAST

®
Heat Blast will raise the current room temperature 3°F
®
to 5°F based on the installer setup, and then resume
normal operation .
Press [Heat Blast] to activate Heat Blast .
Note: Heat Blast button is only available if it is enabled
in the installer setup and the Home Comfort Control is in
Heat or Emergency Heat mode .
To cancel Heat Blast
press [CANCEL], or
[Heat Blast], or the
temperature adjust
buttons .
28
PROGRAM SCHEDULE HOLDS – TEMPORARY
TEMPORARY PROGRAM HOLD
Press or to immediately adjust the temperature
when the schedule is running . This will temporarily hold
the temperature setting until the next scheduled event .
PROGRAM SCHEDULE AND HOLDS
PROGRAM SCHEDULE HOLDS – TEMPORARY
(CONTINUED)
Press
or to adjust the end time of the hold . If
end time is not adjusted, the Temporary Hold will end at
the start of the next event .
To cancel the Temporary Hold, press [CANCEL HOLD] .
PROGRAM SCHEDULE HOLDS – PERMANENT
PERMANENT PROGRAM HOLD
Press [HOLD] to permanently hold the temperature at
its current setting while the schedule is running . This
will override the temperature settings for all events .
With the Home Comfort Control in Permanent Hold, the
temperature setting and fan mode can be adjusted and
will stay at that setting until the hold is cancelled .
To cancel the Permanent Hold, press [CANCEL HOLD] .
29