Table of Contents
Advertisement
AXIS P3807-PVE Network Camera
Configure your device
Configure your device
Adjust the image
This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to Learn more on page 42.
Level the camera
To adjust the view in relation to a reference area or an object, use the level grid in combination with a mechanical adjustment
of the camera.
1. Go to Video > Image > and click
2. Click
3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.
Adjust the camera position
The camera position can be adjusted by hand in the following ways.
Select exposure mode
To improve image quality for specific surveillance scenes, use exposure modes. Exposure modes lets you control aperture, shutter
speed, and gain. Go to Video > Image > Exposure and select between the following exposure modes:
•
For most use cases, select Automatic exposure.
•
For environments with certain artificial lighting, for example fluorescent lighting, select Flicker-free.
Select the same frequency as the power line frequency.
•
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select Flicker-reduced.
Select the same frequency as the power line frequency.
to show the level grid.
.
6
Advertisement
Table of Contents
