Axis ExCam XF P3807 User Manual page 21

AXIS P3807-PVE Network Camera
The device interface
to a high value, images can differ a lot if the light conditions are very different from day to night. Max gain works with max
shutter to improve the image.
Motion-adaptive exposure
Blur-noise trade-off: Use the slider to adjust the priority between motion blur and noise. If you want to prioritize low bandwidth
and have less noise at the expense of details in moving objects, move the slider towards Low noise. If you want to prioritize the
preservation of details in moving objects at the expense of noise and bandwidth, move the slider towards Low motion blur.
Note
You can change the exposure either by adjusting the exposure time or by adjusting the gain. If you increase the exposure
time, it results in more motion blur, and if you increase the gain it results in more noise. If you adjust the Blur-noise
trade-off towards Low noise, the automatic exposure will prioritize longer exposure times over increasing gain, and the
opposite if you adjust the trade-off towards Low motion blur. Both the gain and exposure time will eventually reach
their maximum values in low-light conditions, regardless of the priority set.
Lock aperture
adjust the aperture size. You can, for example, lock the aperture for scenes with permanent light conditions.
Aperture : Use the slider to adjust the aperture size, that is, how much light passes through the lens. To allow more light
to enter the sensor and thereby produce a brighter image in low-light conditions, move the slider towards Open. An open aperture
also reduces the depth of field, which means that objects close to or far from the camera can appear unfocused. To allow more of
the image to be in focus, move the slider towards Closed.
Exposure level: Use the slider to adjust the image exposure.
Defog : Turn on to detect the effects of foggy weather and automatically remove them for a clearer image.
Note
We recommend you not to turn on Defog in scenes with low contrast, large light level variations, or when the autofocus is
slightly off. This can affect the image quality, for example, by increasing the contrast. Furthermore, too much light can
negatively impact the image quality when defog is active.
Stream
General
Resolution: Select the image resolution suitable for the surveillance scene. A higher resolution increases bandwidth and storage.
Frame rate: To avoid bandwidth problems on the network or reduce storage size, you can limit the frame rate to a fixed amount.
If you leave the frame rate at zero, the frame rate is kept at the highest possible rate under the current conditions. A higher
frame rate requires more bandwidth and storage capacity.
Compression: Use the slider to adjust the image compression. High compression results in a lower bitrate and lower image quality.
Low compression improves the image quality, but uses more bandwidth and storage when you record.
Signed video
adding cryptographic signatures to the video.
Zipstream
: Select to reduce motion blur in low-light conditions.
: Turn on to keep the aperture size set by the Aperture slider. Turn off to allow the camera to automatically
: Turn on to add the signed video feature to the video. Signed video protects the video from tampering by
21