Table of Contents
Advertisement
BASIC OPERATIONS
Configuring Display Settings
In the OSD menu, tap
•
Tap Aspect Ratio and select one of the available options: 16:9, 4:3, or PTP (Pixel To Pixel).
Note:
For 4K input, the aspect ratio will be locked to PTP. For non-4K input, PTP will be grayed out and user
can select only 4:3 or 16:9 as aspect ratio.
•
Tap Pixel Shift (min) and select one of the available options: Off, 2, 3, 5, 30, or 60.
Note:
•
Pixel shift feature helps to prevent image retention.
•
Pixel shift is supported with all input sources except for Android.
•
Drag the Backlight slider bar to adjust the backlight level.
Note:
Backlight can be adjusted also in the Shortcut menu. Refer to page 36.
•
Drag the Low Blue Light slider bar to adjust the blue light level.
Note:
Low Blue Light can be adjusted also in the Shortcut menu. Refer to page 36.
•
Tap Dynamic Black and select one of the available options: Off, Based on Content (not supported in Android),
or Based on Ambient light.
Note:
Dynamic black feature gives more depth to your image so that bright scenes appear crisp and clear, while
dark scenes remain detailed with deep blacks and exceptional light and shade detail.
Configuring Signal Settings (for VGA input only)
In the OSD menu, tap
40
English
to open the Display menu, then complete the following steps:
to open the Signal menu, then complete the following steps:
Advertisement
Table of Contents
