Table of Contents
Advertisement
USING THE DISPLAY
Powering On/Off
Powering on
Note:
After the power cord is properly connected, make sure the Power switch is set to ON (I).
AC Input
100-240V
Press the Power
turns white, indicating it is ready to use.
Powering off
Press the Power
wait for 10 seconds until the IFP turns off automatically.
When the LED indicator light turns red, this indicates that the IFP has entered standby mode.
Note:
The IFP still consumes power when it is in standby mode. It is highly recommended to unplug the power
cord from the power outlet if the IFP will not be used for an extended period of time.
30
English
Power
button on the control panel or the remote control to turn on the IFP. The LED indicator light
button for 3 seconds to turn off the IFP. Press OK at the prompt to turn it off immediately or
Advertisement
Table of Contents
