Table of Contents
Advertisement
Materials – Troubleshooting
Striping or flicker may appear under lighting such as fluorescent
or LED lighting.
•
This is characteristic of CMOS sensors which serve as the camera's pickup sensors.
This is not a malfunction.
•
When using the electronic shutter
speed may reduce the effect of the horizontal stripes.
•
If flicker or horizontal stripes are noticeable when recording video, this can be
mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)]
shutter speed with the [
Video (Creative Video/S&Q):
Stripes appear in high ISO sensitivity.
•
Stripes may appear in high ISO sensitivity or depending on the lens you use.
Decrease the ISO sensitivity.
([Shutter Type]:
([Flicker Decrease (Video)]:
]/[S&Q] mode
(Recording Modes Specifically for
359).
(ISO Sensitivity:
782
252), lowering the shutter
295)
403), or fix the
Advertisement
Table of Contents
