Table of Contents
Advertisement
White Balance / Image Quality – Lens Compensation
•
When [Color Shading Compensation] is operating, [
recording screen.
•
If you adjust a compensation value already registered in [PRESET], [¢] is
displayed next to [
•
Compensation values and adjusted values that have not been registered as
presets are cleared when you do the following:
– Operating the camera on/off switch
– Replacing the lens
Registering presets
You can register up to 12 sets of compensation settings.
1
Select [PRESET] in [Color Shading Compensation].
•
[
2
Select any of [SET1] to [SET12] and press
3
Select [Compensate/Adjust] and then press
4
Press [DISP.] while the screen is filled with a subject that has no color variation,
such as a white or gray one.
•
Color shading compensation is executed. Press
•
If further adjustment is required, press 4 and make fine adjustments manually.
5
Select [Focal Length]/[Aperture] and then press
•
Press 21 to select the item and then press 34 to enter the value.
6
Select [Note] and then press
•
You can enter any information, such as a lens name, etc.
Up to 26 characters may be entered. Double-byte characters are treated as 2
characters.
•
How to enter characters
7
Press [DISP.] to register the compensation settings.
].
]/[
]
[
]
(Entering Characters:
[Color Shading Compensation]
or
.
335
] is displayed on the
or
.
or
.
or
.
or
.
101)
[PRESET]
Advertisement
Table of Contents
