Table of Contents
Advertisement
Recording Videos – Basic Video Operations
•
If an operation such as a zoom or button operation is performed during video
recording, that operation sound may be recorded.
•
The lens operation sound (AF and image stabilizer) may be recorded to video.
•
If the operation sound of pressing the video rec. button to end recording bothers
you, try the following:
– Record the video about 3 seconds longer, and then divide the last part of the
video using [Video Divide] in the [Playback] ([Edit Image]) menu.
– Use the Shutter Remote Control (DMW-RS2: optional) for recording.
•
Depending on the type of card, the card access indication may appear for a while
after video recording. This is not a malfunction.
•
Even when playback is performed on a supported device, situations may occur
where image or sound quality is poor, recording information is not displayed
correctly, or playback is not possible, for example.
If you experience any of these, play them back on the camera.
•
Video recording is not possible while you are using the following functions:
– [Time Lapse Shot]
– [Stop Motion Animation]
•
For information about the high temperature display
When the temperature of the camera rises, [
If you continue to use the camera, a message indicating that the camera cannot
be used is displayed on the screen and recording, HDMI output, and the
streaming function will be stopped. Wait for the camera to cool down and for the
message indicating that the camera can be used again. When the message
indicating that it can be used again is displayed, turn the camera off then on
again.
] appears blinking on the screen.
129
Advertisement
Table of Contents
