Table of Contents
Advertisement
Camera Customization – [Custom] Menu
[Sheer Overlay]
[ON] / [OFF]
[SET]
A picture that has been recorded or an image extracted from a video is overlayed on
the recording screen.
1
Use [Image Select] and select a picture or video to display.
•
Press 21 to select a picture or video and then press
confirm.
2
(When a video is selected) Pause playback at the position you wish to extract a
picture.
•
Press 3 to pause playback.
•
To fine-adjust the position, press 21 (rewind frame-by-frame or forward
frame-by-frame).
3
(When a video is selected) Set a picture.
•
Press
•
If you set [Disp. Image (shutter-press)] to [OFF], [Sheer Overlay] is canceled while
the shutter button is being pressed halfway or pressed fully.
•
The picture extracted from video is saved.
•
When the following functions are being used, [Sheer Overlay] is not available:
– Video recording
– [Stop Motion Animation]
or
.
[Transparency]
[Image Select]
[Reset at Power Off]
[Disp. Image (shutter-press)]
592
or
to
Advertisement
Table of Contents
