Wi-Fi / Bluetooth – Send Settings and Selecting Images
Selecting Images
When sending by [Send Images Stored in the Camera to PC], select the
images using the following procedure.
1
Select [Single Select] or [Multi Select].
2
Select the image.
[Single Select] setting
1
Press 21 to select an image.
2
Press
[Multi Select] setting
1
Press 3421 to select an image and then press
•
To cancel the setting, press
•
Images are displayed separately by card slot.
To switch the card to display, press [
•
Selecting images at once is possible only for the images in a single card.
2
Press [DISP.] to execute.
or
.
1
2
3
4
5
6
or
again.
].
695
or
. (Repeat this)