Polaris RANGER XP 900 2013 Owner's Manual page 57

MAINTENANCE
Gearcases
Gearcase Specification Chart
RANGER XP 900 Gearcase Specifications
Gearcase Lubricant Capacity Fill Plug Torque Drain Plug Torque
Main Gearcase AGL PLUS 40.6 oz. 12 ft. lbs. 12 ft. lbs.
(Transmission) Transmission Fluid (1200 ml) (16.3 Nm) (16.3 Nm)
Front Gearcase Demand Drive Plus 6.76-7.6 oz. 8-10 ft. lbs. 8-10 ft. lbs.
Fluid (200-225 ml) (11-13.6 Nm (11-13.6 Nm
Transmission (Main Gearcase)
Always check and change the transmission oil at the
intervals outlined in the Periodic Maintenance Chart
beginning on page 47. Refer to the Gearcase
Specifications Chart for recommended lubricants,
capacities and torque specifications. See page 80 for
the part numbers of POLARIS products.
Gearcase
Oil Check
The level check/fill plug is located on the rear of the
gearcase. Maintain the oil level even with the bot-
Level
tom of the level check/fill plug hole threads.
Check/Fill
Plug
1. Position the vehicle on a level surface.
2. Place the transmission in PARK.
3. Remove the level check/fill plug. Check the oil
level.
4. Add the recommended oil as needed.
5. Reinstall the fill plug. Torque to specification.
Fill
Oil Change
Level
The drain plug is located near the bottom of the
gearcase.
Drain Plug
1. Remove the level check/fill plug.
2. Place a drain pan under the gearcase.
3. Remove the drain plug. Allow the oil to drain completely.
4. Clean and reinstall the drain plug. Torque to specification.
5. Add the recommended oil.
6. Reinstall the fill plug. Torque to specification.
7. Check for leaks. Dispose of used oil properly.
53