Polaris RANGER XP 900 2013 Owner's Manual page 28

FEATURES AND CONTROLS
Rollover Protective Structure (ROPS)
The Rollover Protective Structure (ROPS) on this
vehicle meets OSHA 1928.53 rollover performance
requirements. Always have your authorized
POLARIS dealer thoroughly inspect the ROPS if it
ever becomes damaged in any way.
No device can assure occupant protection in the
event of a rollover. Always follow all safe operating
practices outlined in this manual to avoid vehicle
rollover.
WARNING! Vehicle rollover could cause severe injury or
death. Always avoid operating in a manner that could
result in vehicle rollover.
Cab Nets
Riding in this vehicle without using the cab nets increases the risk of serious injury or death
in the event of an accident or overturn. Cab nets must be used by both operator and passen-
gers at all times. Make sure all latches are secure before operating the vehicle.
Always inspect cab nets for tightness, wear and damage before each use of the vehicle. Use
the strap adjusters to tighten any loose straps. Promptly replace worn or damaged cab nets
with new cab nets, available from your authorized Polaris dealer.
Securing a Net
1. After entering the vehicle, insert the lower net rod
into the net mount on the floor. Make sure the ball
at the end of the rod is properly secured in the
mount.
2. Connect the latch at the top edge of the net to the
receiver latch mounted on the front frame.
Opening a Net
1. To exit the vehicle, release the latch at the top front
edge of the cab net.
2. Rotate the net rearward and pull upward on the
lower net rod to remove it from the mount.
3. Allow the net to hang freely outside the vehicle
while dismounting.
24
ROPS
Net Mount
Ball
Rod
Latch