Polaris RANGER XP 900 2013 Owner's Manual page 23

FEATURES AND CONTROLS
Console
Gear Selector
Storage
Instrument
(Shifter)
Tray
Cluster
12V Auxiliary
Storage
Cup Holder
Outlets
Compartment
Auxiliary Outlets
The 12-volt receptacles have spade connections on the back that may be used to power an
auxiliary light or other optional accessories or lights. The connections are behind the con-
sole, under the dash.
Gear Selector
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
Low gear is the primary driving range for the RANGER. High gear is intended for use on
hard-packed surfaces with light loads.
To shift gears, brake to a complete stop. When the engine is idling, move the lever to the
desired gear.
NOTICE: Shifting gears with the engine speed above idle or while the vehicle is moving could cause
transmission damage. Always shift when the vehicle is stationary and the engine is at idle.
Tip: Maintaining shift linkage adjustment is important to assure proper transmission function. See your
dealer if you experience any shifting problems.
Using Low Range
Always shift into low gear for any of the following conditions.
• Operating in rough terrain or over obstacles
• Loading the vehicle onto a trailer
• Towing heavy loads
19