Start Button; Combination Switch (Exc-F Six Days); Overview Of Indicator Lamps - KTM 250 EXC-F 2021 Owner's Manual

6.9

Start button

6.10 Combination switch (EXC‑F Six Days)
6.11

Overview of indicator lamps

1
Start button
Possible states
• The start button
• The start button
in this position.
V01749-11
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated when
1
LED 1 lights up.
STANDARD with TC – STANDARD mapping with trac-
1TC
tion control is activated when LED 1 and TC light up.
ADVANCED – ADVANCED mapping is activated, when
2
LED 2 lights up.
ADVANCED with TC – ADVANCED mapping with trac-
2TC
tion control is activated when LED 2 and TC light up.
Warning
Voiding of the government approval for road use and the
insurance coverage If the combination switch is mounted,
the vehicle's road permit, if any, expires.
–
Only operate the vehicle in closed-off areas remote
from public road traffic if the combination switch is
installed.
H02887-01
The engine characteristic can be changed using button MAP on the
combination switch.
The traction control can also be activated via the combination
switch.
Possible states
The high beam indicator lamp lights up blue – The
high beam is switched on.
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected an error in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized KTM workshop.
The fuel level warning lamp lights up yellow – The
fuel level has reached the reserve mark.
V01752-10
Turn signal indicator lamp flashes green – The turn
signal is switched on.
is fitted on the right side of the handlebar.
is in the basic position
is pressed – The starter motor is actuated
CONTROLS 6
17