Section 1: Bottle Filler Assembly With Chiller Overview - Oasis MWEBQ User Manual

SECTION 1: BOTTLE FILLER ASSEMBLY WITH CHILLER OVERVIEW

Optional
VersaFilter III
Cradle mounting
angles
(2 provided)
Cooling Unit
mounting cradle
Wall mounting frame secures
into wall with face flush to
the finished wall.
Upper front panel mounts to
frame with bottom screws.
Cooling Unit mounts
inside cradle.
Lower Front Panel mounts
to frame with bottom
screws or optional locks
(2 provided)
Secure cradle mounting angles
to frame flange using screws
provided. Do not tighten screws.
Slide cradle between angles and
attach to angles with screws
provided. Tighten all screws.
Optional Filter
Trim Bezel - accessory on surface
mount models only: MWSMEBQ,
MWSM8EBQ, MWSM12EBQ,
MWSMF2EBQ, MWSM8F2EBQ,
MWSM12F2EBQ
(See page 11)
9