Advertisement
Extract temperature sensor:
Allows viewing the temperature on the extract ductwork upstream of the core.
Temperature range: -30ºC – +50ºC
Discharge temperature sensor:
Allows viewing the temperature on the discharge ductwork downstream of the core .
Temperature range: -30ºC – +50ºC
Fresh Air temperature sensor:
Allows viewing the temperature on the fresh air ductwork downstream of the core .
Temperature range: -30ºC – +50ºC
Supply air temperature sensor:
Allows viewing the temperature on the supply air ductwork downstream of the core .
Temperature range: -30ºC – +50ºC
Installation test :
Allows testing the pressure loss of the installation.
Enter with the key
and modify the value « OFF » to « ON » with the key
confirm with the key
appears :
•
Very good
•
Good
•
Acceptable
•
Bad
, « TESTING » appears and after few seconds the installation level
, then
19
Advertisement
