Advertisement
4. View of the operating states.
View of the operating states:
Allows viewing the operating DOMEO states.
Enter with the keys
To move, use the keys
Coverage radio signal:
Allows viewing the radio range of all remote controls appeared with DOMEO.
Push on one key of the remote controls.
1 – 000%
3 – 000%
Value > 50 % : Good coverage
Value < 50% : Possible communication troubles
Defrost:
Allows viewing if the Domeo is in defrost mode.
ON = Defrost in operation
OFF = Defrost stopped
Battery status:
Allows viewing if the preheating (PRE) and post-heating (POST) batteries are running.
PRE OFF = Stopped
POST OFF = Stopped
Software version :
Allows viewing the installed software version.
Extract fan motor:
Allows viewing operating extract fan motor state.
OK : Working
ERROR : Dysfunction
Intake fan motor:
Allows viewing operating intake fan motor state.
OK : Working
ERROR : Dysfunction
Bypass:
Allows viewing the operating bypass state.
CLOSED : On hold
OPEN : Working
Temperature sensors:
Allows viewing the operating temperature sensors state (OK or ERROR).
T11 : Extract sensor
T12 : Discharge sensor
T21 : Fresh air sensor
T22 : Supply air sensor
18
.
2 – 000%
4 – 000%
Current airflow:
Allows viewing the working airflow.
.
PRE ON = Working
POST ON = Working
Advertisement
