Advertisement
Tint automatic bypass:
You can modify the internal bypass activation temperature.
Factory setting: +24ºC
Setting range: +21 – +30ºC
Enter with the key
, modify the temperature value with the keys
key
.
Manual bypass delay:
You can modify the bypass delay when is manually activated.
Factory setting: 8H
Setting range : 1 – 24H
Enter with the key
, modify the delay with the keys
Type of defrost:
You can choose two types of defrost control:
1 – By reduction of the intake airflow (very tight home or temperate climate)
2 – By shutdown of the intake airflow (not very tight home or cold climate)
Enter with the key
and choose the type of defrost with the keys
key
.
Start-up of the preheating temperature:
Allows adjust the start-up temperature of the preheating temperature.
Factory setting: 0ºC
Setting range: -15ºC – +5ºC
Enter with the key
and choose the temperature with the keys
key
.
Shutdown of the preheating temperature:
Allows adjust the shutdown temperature of the preheating temperature.
Factory setting: +5ºC
Setting range: -5ºC – +10ºC
Enter with the key
and choose the temperature with the keys
key
.
Constant temperature of the preheating battery:
Allows adjust the constant temperature downstream the preheating battery.
Factory setting:= +4ºC
Setting range: +1ºC – +10ºC
Enter with the key
and choose the temperature with the keys
key
.
Constant temperature of the post-heating battery:
Allows adjust the constant temperature downstream the post-heating battery.
Factory setting: +18ºC
Setting range: +12ºC – +30ºC
Enter with the key
and choose the temperature with the keys
key
.
Factory parameters reset:
Allows to reset the DOMEO.
Enter with the key
and choose YES or NO with the keys
the key
.
, then confirm with the
, then confirm with the key
, then confirm with the
, then confirm with the
, then confirm with the
, then confirm with the
, then confirm with the
, then confirm with
.
17
Advertisement
