Systems Requirements; Installation - Rocsecure ROCSAFE Installation Instructions Manual

•
Key: USB
Connectors
•
IDE
•
Key: 4-pin USB type connector x 1
Power Requirement
Rocsafe Drive is powered by the internal notebook power.
Package
•
Rocsafe Encrypted Hard Drive x 1
®
•
KeyCrypt x 1
(Secure Digital Key token)
• User's Manual x 1
(with Administrator password Label
attched)

SYSTEMS REQUIREMENTS

IBM Compatible Notebook
Connections
Minimum 16 MB RAM
PLEASE READ THOROUGHLY AND FOLLOW
THE INSTRUCTIONS PROVIDED IN THIS
MANUAL. FAILURE TO DO SO MAY RESULT IN
DAMAGE TO THE HARD DRIVE AND ANY OR
ALL OF THE CONNECTED DEVICES.
9
with built-in USB
PLEASE READ THOROUGHLY AND FOLLOW THE
INSTRUCTIONS PROVIDED IN THIS MANUAL. FAILURE TO
DO SO MAY RESULT IN DAMAGE TO THE HARD DRIVE AND
ANY OR ALL OF THE CONNECTED DEVICES.

INSTALLATION:

1. Install Rocsafe hard drive in your notebook by
following the notebook manufacturer's manual.
2. Boot your notebook from hard disk.
Changing default password
3. Press F2 to go to advanced settings.
4. Select the "Change Password" option.
5. Type in the default factory password. Then select the
OK button and press ENTER.
6. Select "Back to Login Screen" option.
7. Type in your newly set password and press ENTER.
Installing new Operating System
8. Boot up with the operating system installation CD and
follow the on-screen instructions.
2. Getting Started
2.1 For New Operating System Installation
1. Install Rocsafe into the notebook by following the
notebook manual provided by the manufacturer.
Ensure that the boot up sequence is set to boot
from hard disk.
2. Boot up the notebook and you will be prompted to
type in a password.
10