Rocsecure ROCSAFE Installation Instructions Manual page 4

Single-Factor Authentication:
In this mode of Authentication, the user is prompted for
a Password at the pre-boot stage after power-on. Rocsafe
grants access to the user if the correct password is
presented.
Two-Factor Authentication:
In this mode of Authentication, the user is prompted for
®
the keyCrypt USB cryptographic token (something you
have), as well as the password for the token (something
you know). Rocsafe grants access only if the correct
token and password is presented.
Migration
The Rocsafe Toolkit enables the user to migrate
seamlessly from the original hard disk to Rocsafe,
preserving the software operating environment without
additional modification of the notebook computer.
Data Backup
The Rocsafe Toolkit also allows the user to mirror
periodic and incremental snapshots of the hard disk
onto another external drive can be stored securely,
ensuring business continuity in the unfortunate event of
a notebook being lost or stolen.
7
Technical Specifications:
Storage Capacity & Speed
• 20 GB
• 100 to 133MB/sec Ultra DMA Transfer Rate
Operating Systems
• Operating system independent
®
Tested with: Windows XP, 2000, Me, 98,
98SE and Linux
Interface & Mechanical
• Standard 2.5" HDD. Conforms to SFF-8200,
SFF-8201, SFF-8212
• Size: 100 (L) x70 (W) x 9.5mm (H)
Encryption Algorithm
• NIST & CSE certified DES or TDES up to
64, 128 or 192-bit key strength
Authentication Mechanisms
Pre-boot authentication
• Supports
two-factor authentication
Rocsecure Roc-crypt, USB cryptographic token
Certifications and Standards
• Designed to meet FIPS140-2 Level 2
• CE, FCC
Dimensions and weight
3.9 x 2.7 x 0.3 inch (10.0x6.9x0.9 cm)
Weight
5.5 Ounces
Interface
•
IDE
8
using