Frequently Asked Questions - Rocsecure ROCSAFE Installation Instructions Manual

the installation and remove the KeyCrypt token
from the USB port. Rocsafe does not require
operating system drivers to be installed.
3.6 Special Options
This option allows you
Authentication. Usually, this option is not required.
Select this option only when your notebook displays
the login screen again after a successful login.
Caution:
Please be careful in selecting the HDD to be
partitioned and formatted, once the partition and format
are done, all of the files on the HDD will be erased.
Caution: Do not unplug your Rocsafe hard drive while
Active or in a process of Transferring, Storing, files as
this could result in data loss and disk damage.
Caution: Do not DROP or JOLT your Rocsafe Hard Drive
or attempt to open the drive and service it yourself. These
actions will void the warranty.
21
to enable Persistent

Frequently Asked Questions:

1. What is Rocsafe?
Rocsafe is a hardware based encryption solution for
protecting data on notebooks. It contains an encryption
engine and a hard disk housed in a tamper-proof casing,
and is a direct replacement for ordinary 2.5" notebook
hard drives. It offers two modes of authentication –
Password or Token. Password mode requires the user to
enter a password for authentication. Token mode
implements a strong two factor authentication
mechanism that requires the user to insert his/her Roc-
crypt, USB token and to enter his/her PIN (PASSWORD)
for authentication.
2. How easy is it to start using a new Rocsafe?
It is very simple and straightforward. If you are starting
afresh, just plug Rocsafe into the notebook like a normal
hard disk and boot from it. Once authentication is done,
Rocsafe will present itself as a normal hard drive with
20GB or 30GB capacity. You can install an Operating
System and start using it just like a normal hard drive.
If you're already using an existing hard drive and would
like to migrate all your data to Rocsafe, you purchase the
optional Rocsafe Toolkit. First, simply connect the old
hard disk to the USB port of the notebook using the
Rocsafe Toolkit USB enclosure. Then, boot up with the
Rocsafe Toolkit CD and follow the on-screen instructions.
22