2
Technical Characteristics and
Dimensions
2.1
General Description
The appliance has been AS/NZS 5263.1.2 tested.
Model
Category
Type
Table 2
2.2
Explanation of Model Code
Type
l/min
Series
GWH
10
2
GWH
13
2
GWH
16
2
Table 3
2.3
Package contents
•
Gas heater
•
Fixing Brackets
•
flexible water pipes
•
Gas regulator
•
Heater documentation
2.4
Description of the heater
Designed for convenience, the heater is ready to operate by
simply pressing a switch.
•
Heater for wall-mounting
•
Ignition by electronic device triggered when the water valve
opens
•
Hydrodynamic generator produces sufficient energy to
ignite and control the heater.
•
Gauge to display temperature, burner operation and error
codes
•
Temperature sensor to monitor the water temperature at
the heater outlet
•
Available in Natural gas or LP gas
•
Temporary pilot burner which only functions during the
period between the opening of the water valve and the
ignition of the main burner
•
Water valve made of fibreglass-reinforced polyamide, and
is 100% recyclable
•
Automatic control of the water flow to allow for variable
water supply pressure.
6 720 608 992 (2018/01)
GWH 10/13/16 -2 G..
CONTINUOUS FLOW
INTERNAL
Ignition
Gas Types
G
NG / LP gas
G
NG / LP gas
G
NG / LP gas
Technical Characteristics and Dimensions
•
Gas flow adjustment proportional to the water flow to
maintain a constant temperature.
•
Safety devices:
– Ionisation probe to check for accidental extinction of
the burner flame
– Flue gas safety device which turns off the heater in
cases where the evacuation of flue gases is inadequate
– Overtemperature switch which prevents overheating
of the heat exchanger.
5