Step 3
You will need
3 x Screws
4 x Cam Bolts
(H2)
(H6)
1 x Allen Key
Phillps Head
( H17)
Screwdriver
Attach Steel Bar (P14) to the Top Panel (P1) with 3 x Screws (H2), by tightening with Allen Key
(H17).
Insert 4 x Cam Bolts (H6) into Top Panel (P1), by tightening with a Phillips Head Screwdriver.
Step 4
You will need
3 x Cam Nuts
Phillips Head
(H5)
Screwdriver
Insert 3 x Cam Nuts (H5) into 3 x Support Panels (P6) as shown. Rotate the Cam
Nuts so the arrows points towards the incoming bolts. Attach 3 x Support Panels
(P6) to Left Side Panel (P3) by tightening all cam nuts with the Phillips Head
Screwdriver.
fantasticfurniture.com.au
(H6)
(H6)
(H6)
(H2)
P1
(H2)
P6
P6
(H5)
(H5)
P3
(H6)
(H2)
(H17)
P6
Page 7
(H6)
P14