Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha XJ6 2008 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
2
1
1. Tail/brake light bulb
2. Tail/brake light bulb socket
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the seat.
7
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
7-36
EAU24204
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. License plate light unit
2. Screw
2. Remove the socket (together with
the bulb) by pulling it out.
EAU24312
1
2