Advertisement
12.
Mount the lens (with adaptor and gear) on the camera as described in the camera instruction manual. Note
that the lens should be installed through the converter previously installed on the housing (Fig. 7).
13.
Once the lens has been installed on the camera, test the gear by manipulating the lens dial of the converter
and making sure that it smoothly operates the zoom ring of the lens. To ensure proper operation of the
zoom gear, it is recommended to slightly push the zoom gear in while manipulating the converter lens dial
until the zoom gear is evenly positioned and perfectly aligned with the teeth of the converter lens dial (Fig.
8).
14.
Mount the dome port on the converter following the instructions provided with the dome port and
converter (Fig. 9). For dome ports recommended for this setup, please visit
IMPORTANT NOTICE
3
A slight vignette might be produced when using the Canon 8-15mm lens in some
setups, depending on the camera model and type of lens adaptor used. This
vignette is usually a result of the lens and camera combination and can be avoided
by slightly zooming in, can be cropped out during image post processing or left for
artistic compositions.
C55G Lens Gear Canon 8-15 Fisheye USM Instruction Manual 20180101
www.fantasea.com
Fig.8
Fig.7
Fig.9
Advertisement
