Advertisement
7.
Hold the lens gear facing the rear side of the lens so that the gear teeth are pointed towards the lens (Fig. 3).
8.
Install the lens gear on the lens by sliding it from the back of the lens towards its front. Push the lens gear all
the way in, until it reaches the spacer (Fig.4).
9.
Install the camera (without the lens) inside the housing following the instructions provided with the housing
(Fig. 5).
10.
Close and lock the back door of the housing.
11.
Install the FML – FNX Converter 55G (#2131) on the housing following the instructions provided with the
converter (Fig. 6).
2
Fig.3
Fig.5
C55G Lens Gear Canon 8-15 Fisheye USM Instruction Manual 20180101
Fig.2
Fig.4
Fig.6
Advertisement
