C55G Lens Gear Canon 8-15 Fisheye USM
The C55G Lens Gear Canon 8-15 Fisheye USM enables using the zoom
ring of the Canon EF 8-15mm f/4L Fisheye USM Lens (4427B002). The
focus ring of this lens cannot be accessed using this gear. For housings
and lenses compatibility information, please visit the Fantasea
website –
www.fantasea.com
SPECIFICATIONS
Material: PLA
Dimensions (diameter x height): 100 x 27 mm / 3.94 x 1.06
inch
Weight: 28 g / 0.99 oz
Manufacturer's warranty
IDENTIFICATION OF PARTS
INSTRUCTIONS FOR USE
* The following instructions refer to Fantasea housings featuring the FML port system. For use with other housings,
please download the online instruction manual of the C55G Lens Gear Canon 8-15 on
1.
The lens gear should be installed on the lens prior to mounting the lens on the camera.
2.
Remove the front and rear caps of the lens.
3.
Remove the lens hood to minimize vignette.
4.
Set the AF/MF switch on the lens to AF.
5.
If using a lens adaptor to mount the lens on the
camera, install the adaptor on the lens following the
instructions provided with the adaptor (Fig.1). Note
that if the adaptor features a tripod foot, it should be
removed prior to installing the adaptor on the lens.
For compatibility information and recommended
adaptors, please visit
6.
Install the spacer on the lens by sliding it from the
back of the lens towards its front. Push the spacer all
the way in, until reaching a point of resistance caused
by the widening of the lens (Fig. 2 on the following
page).
1
Fantasea Line
Instruction Manual
Lens Gear
www.fantasea.com
C55G Lens Gear Canon 8-15 Fisheye USM Instruction Manual 20180101
(Cat. No. 2253)
Spacer
www.fantasea.com
Lens
Fig.1
Adaptor