Cooling Operation - Hitachi RAS-X24CCK Instruction Manual

COOLING OPERATION

Use the device for cooling when the outdoor temperature is 7 to 43°C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor
unit.
1 Press the FUNCTION selector so that the display indicates
(COOL).
Set the desired FAN SPEED with the
(the display indicates the setting).
(AUTO) : The FAN SPEED is HI at first and varies to MED
2
or LOW or SILENT automatically when the
preset temperature has been reached.
(HI) : Economical as the room will become cool quickly.
(MED) : Quiet.
(LOW) : More quiet.
(SILENT) : Silent.
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).
3
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
Press the (START/STOP) button. Cooling operation starts
with a beep. Press the button again to stop operation. The cooling
function does not start if the temperature setting is higher than
START
the current room temperature (even though the
STOP
lamp lights).
The cooling function will start as soon as you set the temperature
below the current room temperature.
As the settings are stored in memory in the remote controller, you
only have to press the
- 8 -
(FAN SPEED) button
(OPERATION)
(START/STOP) button next time.