Table of Contents
Advertisement
COOLING OPERATION
Use the device for cooling when the outdoor temperature is
-1 O
to 46°C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor
unit.
HrTACHI
Press the FUNCTION selector so that the display indicates
¢
(COOL).
Set the desired FAN SPEED with the
If
(FAN SPEED) button
(the display indicates the setting).
c;;!l;J
(AUTO)
: The FAN SPEED is HI at first and varies to MED
automatically when the preset temperature has
been reached.
'j'
(HI)
:
Economical as the room will become cool
quickly.
~
(MED)
: Quiet.
'iii'
(LOW)
: More quiet.
c;;..,
(SILENT): Silent.
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the
setting).
The temperature setting and the actual room temperature may
vary somewhat depending on
conditions.
Press the CD (START/STOP) button. Cooling operation starts
with a beep. Press the button again to stop operation. The cooling
~-~
function does not start if the temperature setting is higher than
,,-i------lthe
current room temperature (even though the
CD
(OPERATION)
lamp lights).
The cooling function will start as soon as you set the temperature
below the current room temperature.
• As the settings are stored in memory in the remote controller, you
only have to press the
CD
(START/STOP) button next time.
- 10
-
Advertisement
Table of Contents
