STARTING AND DRIVING
Selecting ignition mode
The vehicle's ignition can be put in various
modes (levels) to make different functions
available.
Selecting an ignition mode
Start knob in the tunnel console.
Ignition mode 0 – Unlock the vehicle and
•
keep the remote key in the passenger
compartment.
NOTE
To set level I or II without engine start –
do not depress the brake pedal (or clutch
pedal for vehicles with manual transmis-
sion) when selecting this ignition mode.
Ignition mode I – Turn the start knob
•
clockwise and release it. The control will
382
automatically return to the original posi-
tion.
Ignition mode II – Turn the start knob
•
clockwise and hold it there for
approx. 5 seconds. Release the knob,
which will automatically return to its origi-
nal position.
Back to ignition mode 0 – To return to
•
ignition mode 0 from modes I and II, turn
the start knob clockwise and release it.
The control will automatically return to the
original position.
Related information
Starting the vehicle (p. 378)
•
Switching off the vehicle (p. 380)
•
Ignition modes (p. 381)
•
Adjusting the steering wheel (p. 193)
•
Jump starting using another battery
•
(p. 420)
Brake functions
The vehicle's brakes are used to reduce
speed or prevent the vehicle from rolling.
In addition to the wheel brakes and parking
brakes, the vehicle is also equipped with a
number of automatic brake assist functions.
These systems provide assistance by e.g. the
driver not needing to depress the brake pedal
at a traffic light or when starting up a hill.
Depending on how the vehicle is equipped,
the following brake assist functions may be
included:
Auto-hold brake function at a standstill
•
(Auto Hold)
Hill Start Assist (Hill Start Assist)
•
Braking assist after a collision
•
City Safety
•
Related information
Brakes (p. 383)
•
Parking brake (p. 385)
•
Auto-hold brakes (p. 389)
•
Braking assist after a collision (p. 391)
•
Hill Start Assist (p. 390)
•
City Safety™ (p. 312)
•