Download Print this page

Gravely Pro-Turn 152 EFI Operator's Manual page 27

Hide thumbs Also See for Pro-Turn 152 EFI:

Advertisement

Description
Transaxle Drive Belt
Fuel Stabilizer – 118 ml
(4 oz)
• (Except Canada)
• For Canada Only
Hydraulic Oil Filter
Hydraulic Oil and Filter Kit
Relay
CHECK SAFETY INTERLOCK
SYSTEM
See Before Operation on page 18. If system
does not operate correctly, see your dealer
for repair. DO NOT operate until repairs are
made.
CHECK HYDRAULIC SYSTEM
Check Hydraulic Oil Level
See Figure 27.
1. Place unit in service position. See
Service Position on page 23.
2. Check oil level in expansion tanks. Oil
should reach the cold fill indicator mark.
IMPORTANT: Engine should be cold when
checking initial oil level.
1
1. Cold Fill Indicator Mark
Figure 27
3. Operate engine for 1 minute and recheck
oil levels.
4. Add hydraulic oil, if needed. See Add
Hydraulic Oil on page 25.
Add Hydraulic Oil
1. Place unit in service position. See
Service Position on page 23.
Qty. Part No.
1
07226400
A/R
04730300
04742400
2
21545100
1
59402700
A/R 04438400
EN - 25
2. Remove hydraulic oil expansion tank
caps.
3. Fill expansion tanks with 15W-50
synthetic motor oil (Gravely
p/n 00057100) or equivalent until oil
reaches the cold fill indicator mark. See
Figure 27.
4. Reinstall expansion tank caps.
Change Hydraulic Oil and Filter
1. Operate unit for a few minutes to warm
hydraulic oil.
2. Stop engine, remove key and wait for all
moving parts to stop and for hot parts to
cool.
3. Position container under oil filter to catch
used oil.
See Figure 28.
4. Remove filter guard and oil filter from
transaxle.
5. Remove vent / fill plug from the fill port
and allow transaxle to drain completely.
Figure 28
6. Wipe filter-mounting surface clean.
7. Lubricate rubber gasket on new oil filter
with clean hydraulic oil.
8. Spin filter onto filter housing until it makes
contact, and then turn filter 3/4 turn to
tighten.
9. Reinstall filter guard and torque to 7.3
N•m (65 lb-in). DO NOT overtighten.
10. Add 15W-50 synthetic motor oil (Gravely
p/n 00057100) or equivalent until oil
appears at the bottom of the fill port
(1892.7 mL (64 fl. ounces) per transaxle).

Advertisement

loading