Tristar GR-2650 - Grill Manual

PARTS DESCRIPTION

1. Indication light red
2. Safety lock
3. Grill plates

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz)
• When the device is turned on for the first time, a slight odor will occur. This is normal, ensure adequate ventilation. This fragrance is only temporary and will disappear soon.

USE

• Ensure at all times that the lock function is not in use when opening the grill.
• When closing the contact grill, make sure the top plate is correctly positioned on the lower plate.
• Plug in the socket, the red indication light will light up. Leave the device closed without any content to warm it. When the red indication light goes out, you will be able to start grilling.
• Slightly grease the anti stick coating of the grill plates with oil or butter.
• During use, the trays and the shell are very hot, Avoid any contact, as it can seriously injure you.

CLEANING AND MAINTENANCE

• Remove the plug from the wall outlet and allow the device to cool both halves open.
• Clean the baking plates with a damp cloth or soft brush.
• Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the device.
• Never immerse the electrical device in water or any other liquid. The device is not dishwasher proof.

Support
You can find all available information and spare parts at service.tristar.eu!