Tristar PD-8744 - Electric Table BBQ Manual

Table of Contents

PARTS DESCRIPTION

Device Overview

Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
Clean before use the appliance with a damp cloth.
By using the appliance for the first time, the appliance may smell and emit some smoke. This is normal, the grease that may have adhered to the element during manufacture is burning off.

Make sure you place a heat resistance coating under the appliance in order to prevent traces due to heat and grease stains on your table.
Fill the grease tray with water, make sure the water level remains below the element.
Slide the heating element into its position. Note: the heating element is equipped with a safety switch, if the element is not placed in the correct position the element will not function.
Place the grill on the appliance.
During the use the water will evaporate and should be refilled. Note: make sure you do not drip water on to the element.
Covering the BBQ with aluminium foil or other material is dangerous! The heat cannot get away and will cause the BBQ to melt and malfunction.

Always unplug the device and let it cool down completely before cleaning
Remove and empty the fat collecting tray after each use and wash the tray in warm, soapy water.
Wipe the outside with only a slightly moistened cloth ensuring that no moisture, oil or grease enters the cooling slots.
Never use abrasive cleaners, metal brushes or paint thinner to clean the base, otherwise the barbecue will be damaged.
Never immerse the device under water, the device and the various parts are not dishwasher-proof.

Support
You can find all available information and spare parts at www.tristar.eu!