Tristar RA-2996 - Raclette Manual

PARTS DESCRIPTION

1. Baking plate
2. Baking pan
3. Heat up indicator
4. Temperature control knob

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz)
• Turn the thermostat clockwise to the highest setting, the heat up indicator will illuminate. When the appliance reached the desired temperature the heat up indicator will go off. Allow the device to heat up at the highest setting for at least 5 minutes without food.
• When the device is turned on for the first time, a slight odor will occur. This is normal, ensure adequate ventilation. This fragrance is only temporary and will disappear soon.

USE

• Grease the griddle and the pans with a little oil.
• Do not use anything metal, to avoid damaging the non-stick coating.
• During cooking, any bits of food left behind should be removed immediately to prevent them from sticking onto the plate.
• On the grill plate there is a round recessed part which you can use for baking eggs or crepes.
• Never put frozen food on the grill plate, the heat shock could damage the plate.
• Place the pans with food on the reflective surface, under the grill plate. Never place an empty pan on the reflective surface under the grill plate.
• The pans can also be used to cook meat, make sure it is sliced thin.
• Never put the pan on top of the grill plate during use. Never move the grill plate when it is still hot, you could get burned.

CLEANING AND MAINTENANCE

• Before cleaning, unplug the appliance and wait for the appliance to cool down.
• Wipe the inside and the edges of the appliance with a paper towel or a soft cloth.
• Do not clean the inside or outside with any abrasive scouring pad or steel wool as this will damage the finish.
• Do not immerse the appliance in water or any other liquid.