Advertisement
Certification
The RUGGEDCOM RS900F device has been thoroughly tested to guarantee its confor-
mance with recognized standards and has received approval from recognized regula-
tory agencies.
6.1
Approvals
This section details the standards to which the RUGGEDCOM RS900F complies.
6.1.1
CSA
This device meets the requirements of the following Canadian Standards Association
(CSA) standards under certificate 16.70065161:
•
CAN/CSA-C22.2 No. 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National Standard, with UL 60950-1)
•
UL 60950-1
Information Technology Equipment – Safety Part 1: General Requirements
•
CAN/CSA-C22.2 No. 213-M1987
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Loca-
tions
•
CAN/CSA-C22.2 No. 60079-0:11
Explosive Atmospheres – Part 0: Equipment – General Requirements
CAN/CSA-C22.2 No. 60079-15:12
•
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Test
and Marking of Type of Protection "n" Electrical Apparatus
•
UL 60079-0, Edition 6.0 (2013)
Explosive Atmospheres – Part 0: Equipment – General Requirements
•
UL 60079-15, Edition 4.0 (2013)
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection "n"
•
ANSI/ISA-12.12.01-2013
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
RUGGEDCOM RS900F
Installation Manual, 02/2020, C79000-G8976-1350-04
All manuals and user guides at all-guides.com
6
31
Advertisement
